DEPARTMENT.FACULTY

photo
Dr. Md. Reyaz Arif
  • DEPARTMENT_STAFF.QUALIFICATION

    PhD, M.Tech., B. Tech

  • DEPARTMENT_STAFF.DESIGNATION

    Assistant Professor (Contractual)

  • DEPARTMENT_STAFF.THRUST_AREA

    Fluid Mechanics, Heat Transfer, CFD, Solar Energy

  • DEPARTMENT_STAFF.ADDRESS

    Unmanned Air Vehicles Laboratory, ZHCET, AMU, Aligarh

  • DEPARTMENT_STAFF.MOBILE

    9760314529

  • DEPARTMENT_STAFF.EMAIL

    reyazarif@zhcet.ac.in

  • DEPARTMENT_STAFF.TIME_TABLE

    Time Table 2022-23

DEPARTMENT_STAFF.COMPLETE_CV

  • Dr. Md. Reyaz Arif is currently working as an Assistant Professor in Mechanical Engineering Department, ZHCET, AMU, Aligarh. He was awarded Junior Research Fellowship (JRF) and Senior Research Fellowship (SRF) under Maulana Azad National Fellowship Scheme during doctoral research. Research interest is in the generic area of Fluid Mechanics, Heat Transfer, Computational Fluid Dynamics, Renewable and Solar energy. Published eight (SCI/SCOPUS indexed) research papers in reputed journals like Physics of Fluids (AIP), International Journal of Heat and Mass Transfer (Elsevier), Numerical Heat Transfer, Part A: Applications (Taylor & Francis), Journal of Thermal Science and Engineering Applications (ASME), Environmental Fluid Mechanics (Springer) etc.


EDUCATIONAL QUALIFICATIONS:


Ph.D. (Computational Fluid Dynamics) 
M. Tech (Thermal Sciences) 
B. Tech (Mechanical)

TEACHING EXPERIENCE: 1st August 2019 - Till Date
  1. Vortex shedding suppression in mixed convective flow past a square cylinder subjected to large-scale heating using a non-Boussinesq model

    Md. Reyaz Arif and Nadeem Hasan, “Vortex shedding suppression in mixed convective flow past a square cylinder subjected to large-scale heating using a non-Boussinesq model,” Physics of Fluids, American Institute of Physics, 31 (2), pp. 023602 (1-22), 2019. [SCI, H-Index: 180, Impact Factor: 3.521] [doi:10.1063/1.5079516]

  2. “Effect of free-stream inclination and buoyancy on flow past a square cylinder in large-scale heating regime
    Md. Reyaz Arif and Nadeem Hasan, “Effect of free-stream inclination and buoyancy on flow past a square cylinder in large-scale heating regime,” Physics of Fluids, American Institute of Physics, 33 (7), pp. 073601 (1-26), 2021. [SCI, H-Index: 180, Impact Factor: 3.521] [doi:10.1063/5.0054766]


  3. “Thermal performance comparision and augmentation of two identical box-type solar cookers operating in tropical climatic conditions
    Md. Reyaz Arif, Mohd Athar Khan, Md. Azhar, Naiem Akhtar and Md. Meraj, “Thermal performance comparision and augmentation of two identical box-type solar cookers operating in tropical climatic conditions,” Journal of Thermal Science and Engineering Applications, Transaction of ASME, 13(6): 061004, 2021. [SCI, H-Index: 27, Impact Factor: 1.47] [doi:10.1115/1.4050323]


  4. “Large-scale heating effects on global parameters for flow past a square cylinder at different cylinder inclinations
    Md. Reyaz Arif and Nadeem Hasan, “Large-scale heating effects on global parameters for flow past a square cylinder at different cylinder inclinations,” International Journal of Heat and Mass Transfer, Elsevier, 161, pp. 120237 (1-25), 2020. [SCI, H-Index: 208, Impact Factor: 5.584] [doi:10.1016/j.ijheatmasstransfer.2020.120237]


  1. Comparative performance analysis of photovoltaic modules of different materials for four different climatic zone of India

    Sazia Khanam, Md. Meraj, Md. Azhar, M.N. Karimi, Tausif Ahmad, Md. Reyaz Arif, Wael Al-Kouz, “Comparative performance analysis of photovoltaic modules of different materials for four different climatic zone of India,” Urban Climate, Elsevier, 39, pp. 100957, 2021. [SCI, H-Index: 43, Impact Factor: 5.731] [doi:10.1016/j.uclim.2021.100957]

  2. Performance of characteristic numerical boundary conditions for mixed convective flows past a heated square cylinder using a non-Boussinesq approach
    Md. Reyaz Arif and Nadeem Hasan, “Performance of characteristic numerical boundary conditions for mixed convective flows past a heated square cylinder using a non-Boussinesq approach,” Numerical Heat Transfer, Part A: Applications, Taylor & Francis, 76 (4), pp. 254-280, 2019. [SCI, H-Index: 68, Impact Factor: 2.960] [doi:10.1080/10407782.2019.1627828]


  3. Effect of thermal buoyancy on vortex-shedding and aerodynamic characteristics for fluid flow past an inclined square cylinder

    Md. Reyaz Arif and Nadeem Hasan, “Effect of thermal buoyancy on vortex-shedding and aerodynamic characteristics for fluid flow past an inclined square cylinder,” International Journal of Heat and Technology, 38 (2), pp. 463-471, 2020. [Scopus, H-Index: 29, Citescore: 2.80] [doi:10.18280/ijht.380223]

  4. Thermal Diffusivity Measurement of Spherical Shaped Food Products under Forced Convection Cooling
    Md. Reyaz Arif, Sajjad Arif and Md Azhar, “Thermal Diffusivity Measurement of Spherical Shaped Food Products under Forced Convection Cooling,” International Journal of Innovative Research in Science, Engineering and Technology, ISSN 2319-8753, 4 (7), pp. 5521-5527, 2015.


  5. Fabrication of PMMA/CaCO3 Nanocomposites: Optimization of Tensile Strength through Taguchi’s Analysis

    Sajjad Arif, Md Azad Alam, Md. Reyaz Arif and Akhter H. Ansari, “Fabrication of PMMA/CaCO3 Nanocomposites: Optimization of Tensile Strength through Taguchi’s Analysis,” International Journal of Scientific and Research Publications, ISSN 2250-3153, 5 (7), pp. 1-6, 2015.

LISTDownloadUPLOADED DATE
ME_497_pattern_making_casting
26/09/2019
ME_497_metal_removal_process
26/09/2019
Asymmetrical_Bending_ME_418
27/09/2019
Bending_of_curved_beams_ME_418
27/09/2019
Torsion_of_general_cross-section_bar
27/09/2019
Torsion_of_elliptic_bar
27/09/2019
Torsion_of_rectangular_bar
27/09/2019
Heat_Treatment_Exp_4
10/10/2019
ME_497_powder_metallurgy_Exp_3
10/10/2019
FEM_Beam_Frame
04/12/2019
Draft_tube(EMEC3320)
07/04/2020
Hydraulic_turbines(EMEC3320)
08/04/2020
specific_speed(EMEC3320)
10/04/2020
Unit_quantities(EMEC3320)
10/04/2020
performance_characteristics(EMEC3320)
10/04/2020
Governing_of_turbines(EMEC3320)
10/04/2020
Pumps_part1(EMEC3320)
10/04/2020
Home_Assignment(EMEC3320)
10/04/2020
MEA1920_sessional_marks_out_of_70
04/09/2020
EMEA1920_workshop_marks_BE_first_year_out_of_70
05/09/2020
EMEC2310_sessional_marks
17/12/2020