Department of Mechanical Engineering

Other Committees

Dept. data last updated on :10/10/2024

COMMITTEES OF THE DEPARTMENT

Curriculum Development Committee (CDC)


  1. Prof. M. F. S. Baig  (Convener)

  2. Prof. Imtiaz Ali Khan

  3. Prof. Akhter H. Ansari

  4. Prof. M. Naushad Alam

  5. Prof. Nadeem Hasan

  6. Prof. Naiem Akhtar

  7. Mr. Nafees Ahmad

  8. Prof. Ahmad Ali Khan


Post Graduate Research Committee (PGRC)


  1. Prof. Raisuddin Ansari (Convener)

  2. Prof. Mohammad Altamush Siddiqui

  3. Prof. Mirza Faisal Sayeed Baig

  4. Prof. Ahmad Ali Khan

  5. Prof. Imtiaz Ali Khan, Convener, PGCC- Ind. & Prod.

  6. Prof. Mohd. Naushad Alam (PhD Coordinator)

  7. Prof. Nadeem Hasan, Convener, PGCC-Thermal

  8. Prof. Syed Fahad Anwar

  9. Prof. Arshad Hussain Khan, Convener, PGCC-Design

  10. Prof. Faisal Hasan

  11. Prof. Saleem Anwar Khan, Convener, PGCC – Rob. & Aut.


Note :   PGRC will be the Co-ordination Committee for all PG courses. All the four PGCC’s will be Sub-Committees under PGRC. PGRC will also act as Research Steering Committee.


PG Co-Ordination Committee (Thermal)


  1. Prof. Naiem Akhtar (Convener)

  2. Prof. Nadeem Hasan

  3. Prof. Shah Shahood Alam

  4. Mr. Nafees Ahmad

  5. Prof. Syed Fahad Anwar

  6. Dr. Syed Mohd. Yahya


PG Co-Ordination Committee (Ind. & Prod.)


  1. Prof. Imtiaz Ali Khan (Convener)

  2. Prof. Abid Ali Khan

  3. Prof. Akhtar Hussain Ansari

  4. Prof. Mohammad Ali

  5. Prof. Parveen Farooquie

  6. Prof. Faisal Hasan


PG Co-Ordination Committee (Machine Design)


  1. Prof. M Naushad Alam (Convener)

  2. Prof. Raisuddin Ansari

  3. Prof. Ahmad Ali Khan

  4. Prof. Arshad Hussain Khan

  5. Dr. M. Yaqoob Yasin

  6. Mr. M. Rashid Zafar Ansari


PG Co-Ordination Committee (Rob. & Aut)


  1. Prof. Saleem Anwar Khan (Convener)

  2. Prof. M. Faisal S. Baig

  3. Prof. Mohammed Ali

  4. Dr. Muhammad Muaz 

  5. Dr. Yasser Rafat

  6. Dr. Azhar Jamil


UG Co-Ordination Committee


  1. Prof. Mohammad Ali (Convener)

  2. Prof. Akhtar Husain Ansari

  3. Prof. M. Naushad Alam

  4. Prof. Nadeem Hasan

  5. Prof. Mohammad Faizan

  6. Prof. Saleem Anwar Khan

  7. Prof. Arshad Hussain Khan

  8. Dr. Mubashshir Ahmad Ansari, UG Coordinator

  9. Dr. Najeeb Ur Rahman, In-charge, Time-Table

  10. Dr. M. Rashid Zafar


Project Monitoring Committee (PMC)


  1. Prof. Mohammad Muzammil, Chairman

  2. Prof. M. F. S Baig, Senior most Professor of Fluid Mechanics (Member)

  3. Prof. M. Altamush, Senior most Professor of Thermal Section (Member)

  4. Prof. Naiem Akhtar, Senior most Professor of Thermal Section (Member)

  5. Prof. Raisuddin Ansari, Senior most Professor of Machine Design Section (Member)

  6. Prof. Ahmad Ali Khan, 

    Senior most Professor of Machine Design (Member)

  7. Prof. Mohammed Ali, 

    Senior most Professor of Ind. & Prod. Section (Member)

  8. Prof. Abid Ali Khan
     Senior most Professor of Ind. & Prod. Section (Member)

  9. Mr. Nafees Ahmad, Senior most Associate Professor Heat Power Section(Member)

  10. Asif Sami, Senior most Associate Professor of Machine Design Section (Member)

  11. Mr. Khusro Qasim, Senior most Assistant Professor (Member)

  12. Prof. Mohammed Ali, Secretary of the Departmental Steering Committee


Ethics Committee


  1. Prof. M. Muzammil (Convener)

  2. Prof. Abid Ali Khan

  3. Prof. S. Fahad Anwer

  4. Dr. Fazlur Rehman (Dept. of Anatomy J.N.M.C.)

  5. Mr. Mohd. Imran, (Asstt. Prof. IPR, ZHCET)


Industry Institute Interaction Committee


    1. Prof. Mohammad Muzammil (Chairman)

  1. Prof. Arshad Hussain Khan (Convener)

  2. Prof. Syed Fahad Anwer

  3. Mr. Nafees Ahmad

  4. Mr. Abdul Jabbar, Workshop superintendent


Data Base Cell (DBC)


  1. Prof. Mohammed Ali (Convenor).

  2. Dr. M. Yaqoob Yasin.

  3. Dr. Azhar Jamil.

  4. Dr. Mohammad Asif.

  5. Mr. M. Zakir Hashmi.

  6. Mr. M. Mushir Riaz.


Nodal Officers to Monitor the use of Electricity


  1. Mr. Mohd. Naim, Tech. Asstt. – Heat Power Section

  2. Mr. Nafees Ahmad, Tech. Asstt.– Ind. & Prod. Section.

  3. Mr. Ehteshamur Rehman, Tech. Asstt.– M/C Design Section.

  4. Mr. M. Shahzad Sharif, Tech. Asstt.- F. M. Section.

  5. Mr. Mohd. Asghar, Tech. Asstt. – Workshop Office and all shops.

  6. Mr. Zaheer Ahmad, Tech. Asstt. – Computing System Lab, Seminar Library and Powder Metallurgy Lab.

  7. Mr. Faisal Kirmani, Lab Asstt. – Office Building.


Career Counselling Committee (CCC)


  1. Prof. M. Faisal S. Baig (Convener)

  2. Prof. Ahmad Ali Khan

  3. Prof. Faisal Hasan

  4. Prof. Saleem Anwar Khan


Academic Monitoring Committee (AMC)


  1. Prof. M. Altamush Siddiqui (Convener)

  2. Prof. Mirza Faisal Sayeed Baig

  3. Prof. Mohd. Muzammil

  4. Prof. Raisuddin Ansari


Feed Back Committee


  1. Dr. Rashid Ali (Convener)

  2. Dr. Mubashshir Ahmad Anw

  3. Mr. Taliv Hussain

  4. Mr. Mohammad Rashid Zafar Ansari

  5. Dr. Farhan Ahmad Shameem

  6. Mr. Mohammad Zakir Hashmi

  7. Mr. Mohammad Mushir Riaz


Committee to obtain Data from the Alumni Cell 


  1. Mr.  Nafees Ahmad (Convener)

  2. Dr. S.M. Yahya

  3. Mr. Abdul Jabbar


Committee to regularly update the departmental data 

  1. Prof. Mohammed Ali (Convenor).

  2. Dr. M. Yaqoob Yasin.

  3. Dr. Azhar Jamil.

  4. Dr. Mohammad Asif.

  5. Mr. M. Zakir Hashmi.

  6. Mr. M. Mushir Riaz.


Academic Industry Advisory Board

    1. Dr. Gufran S. Khan, Associate Professor, Instrument Design & Development Centre, IIT, Delhi (Person from Academic Institute)

    2. Dr. Indra Vir Singh, Associate Professor, Department of Mech. & Ind. Engineering, IIT, Roorkee (Person from Academic Institute)

    3. Mr. Vijay Kumar, Director, Ministry of Industry, Karnal, Haryana (Person from Industry)

    4. Mr. Kamran Farshori, CEO, Batala Engineering, Sector 150, Greater Noida (Person from Industry)

    5. Prof. M. Faisal S. Baig, Professor, Department of Mechanical Engineering, A.M.U., Aligarh (PGRC Representative)

    6. Prof. Mohammed Ali, Professor, Department of Mechanical Engineering, A.M.U., Aligarh (UGCC Representative)

    7. Prof. M. Muzammil, Chairman, Department of Mech. Engg., A.M.U., Aligarh, (Chairman of the Department)


Committee to Decide the Utilization of IRG Funds Collected in the Department


  1. Prof. Mohammad Muzammil (Chairman)

  2. Prof. Raisuddin Ansari (Next Chairman)

  3. Prof. Abid Ali Khan, Section Incharge, Industrial & Production Section

  4. Prof. Arshad Hussain Khan, Section Incharge, Machine Design Section

  5. Prof. Syed Fahad Anwar, Section Incharge, Fluid Mechanics Section

  6. Prof. Saleem Anwar Khan, Section Incharge, Thermal Engineering Section

  7. Prof. Mohammed Ali, Member from Industrial & Production Section

  8. Dr. Danish Iqbal, Member from Machine Design Section

  9. Dr. Rashid Ali, Member from Fluid Mechanics Section

  10. Mr. Nafees Ahmad, Member from Thermal Engineering Section

  11. Dr. Syed Mohd Yahya Coordinator (EV and Hybrid Vehicles Program)


Quality Assurance Cell Committee


  1. Prof. Mirza Faisal Sayeed Baig (Convener)

  2. Prof. Imtiaz Ali Khan

  3. Prof. Shah Shahood Alam

  4. Prof. Naiem Akhtar

  5. Prof. M. Naushad Alam


Committee for Editorial Board for Students' Magazine


  1. Dr. Yasser Rafat (Convener)

  2. Mr. Nafees Ahmad

  3. Prof. Syed Fahad Anwer

  4. Prof. Saleem Anwar Khan

  5. Mr. Ateeb Ahmad Khan


Committee for Mentoring Activities


  1. Dr. Rashid Ali (Convener)

  2. Prof. Arshad Hussain Khan

  3. Prof. Parveen Farooqui

  4. Dr. S.M. Yahya


Committee for Academic Activities


    1. Prof. Abid Ali Khan (Convenor)

  1. Prof. Akhtar H. Ansari.

  2. Prof. Syed Fahad Anwer.

  3. Prof. Arshad Hussain Khan.

  4. Prof. Mohammad Faizan.


Committee to Develop the Academic Calendar for UG and PG Programs


  1. Prof. Imtiaz Ali Khan (Convener)

  2. Dr. Najeeb Ur Rehman


Website Committee


  1. Dr. Abdullah Y Usmani (Convener)

  2. Dr. Danish Iqbal

  3. Dr. Sanaur Rehman

  4. Dr. Sajjad Arif

  5. Dr. Muhammed Muaz

  6. Dr. Md. Reyaz Arif


Committee to suggest the criteria for selection of Outstanding Researcher


  1. Prof. Faisal Hasan (Convener)

  2. Prof. M. Altamush Siddiqui

  3. Prof. Mirza Faisal Sayeed Baig

  4. Prof. Arshad Hussain Khan

  5. Prof. Syed Fahad Anwer


Anti-Ragging Committee


  1. Prof. Mirza Faisal Sayeed Baig

  2. Prof. Imtiaz Ali Khan

  3. Prof. Parveen Farooquie

  4. Mr. Nafees Ahmad

  5. Dr. Rashid Ali

  6. Mr. Salman Mohd. Khan (Ph.D. Scholar)

  7. Mr. Athar Zafar (M.Tech. Student)

  8. Mr. Sharib Imam (M.Tech Student)


Anti-Sexual Harassment Committee


    1. Prof. Parveen Farooquie (Convener)

  1. Prof. Ahmad Ali Khan

  2. Mr. Nafees Ahmad


Students' Grievance Redressal Committee


  1. Prof. Mohammad Muzammil (Chairman)

  2. Prof. M. Altamush Siddiqui (Seniormost Professor)

  3. Mr. Nafees Ahmad (Seniormost Associate Professor)

  4. Mr. Khusro Qasim (Seniormost Assistant Professor)

  5. Ms Zuha shoaib (B.Tech. II Year)

  6. Mr. Mayank Awasthi (B.Tech. II Year)

  7. Mr. Arquam Hashim Siddiquie (B.Tech. III Year)

  8. Ms Swarnima 
    (B.Tech. III Year)

  9. Mr. Mohammad Farhan Khan 
    (B.Tech. IV Year)

  10. Ms. Zaufisha Saleem (
    B.Tech. IV Year)



Internal Revenue Generation Cell


  1. Prof. Saleem Anwar Khan (Convener)

  2. Prof. Raisuddin Ansari

  3. Prof. Arshad Hussain Khan

  4. Prof. Abid Ali Khan

  5. Mr. Nafees Ahmad

  6. Prof. Syed Fahad Anwer

  7. Prof. Mohd. Ali

  8. Dr. Rashid Ali

  9. Dr. Syed Mohd Yahya

  10. Dr. Danish Iqbal


Display committee 


  1. Prof. Mohammed Ali (Convener)

  2. Prof. Imtiaz Ali Khan

  3. Mr. Nafees Ahmad.

  4. Dr. Yasser Rafat


NBA accreditation (B.Tech) Committee


  1. Dr. Rashid Ali (Coordinator)


NBA accreditation (M.Tech - Thermal) Committee


  1. Prof. Syed Fahad Anwer (Coordinator)

  2. Prof. Saleem Anwer Khan (Co-Coordinator)


NBA accreditation (M.Tech - Industrial) Committee


  1. Prof. Imtiaz Ali Khan (Coordinator)


NBA accreditation (M.Tech - Machine Design) Committee


  1. Prof. Arshad Hussain Khan (Coordinator)


Committee to decide the utilization of IRG funds collected in the department.

  1. Prof. Mohammad Muzammil (Chairman)

  2. Prof. Raisuddin Ansari (Next Chairman)

  3. Prof. Abid Ali Khan (Section In-charge, Industrial & Production Engg. Section)

  4. Prof. Arshad Hussain Khan (Section In-charge, Machine Design Section)

  5. Prof. Syed Fahad Anwar Khan (
    Section In-charge, Fluid Mechanics Section)

  6. Prof. Saleem Anwar Khan
     (Section In-charge, Thermal Engg. Section)

  7. Prof. Mohammed Ali (Member from Industrial & Production Engg. Section)
  8.  Dr. Danish Iqbal (Member from Machine Design Section)
  9. Dr. Rashid Ali
    (Member from Fluid Mechanics Section)
  10. Mr. Nafees Ahmad 
    (Member from Thermal Engg. Section)
  11. Dr. Syed Mohd Yahya (Coordinator, EV and Hybrid Vehicles Program)

Section In-charges 

  1. Prof. Abid Ali Khan - Industrial & Production Engineering 

  2. Prof. Arshad Husain Khan - Machine Design

  3. Prof. Syed Fahad Anwer - Fluid Mechanics

  4. Mr. Saleem Anwar Khan - Thermal Engineering



) Prof. Abid Ali Khan, Industrial & Production Engineering Section i) Prof. Arshad Hussain Khan, Machine Design Section Prof. Syed Fahad Anwar, Fluid Mechanics Section iv) Prof. Saleem Anwar Khan, Thermal Engineering Section


PhD coordinator


  1. Prof. M. Naushad Alam 


Project coordinator


  1. Prof. Mohammad Faizan