Prof. Syed Rizvi - Department of Petroleum Studies

Faculty Member

Prof. Syed Javed Ahmad Rizvi

Qualification
Ph.D. (IIT Delhi) titled "Microcellular Injection Molding of Thermoplastic Foams", M.Tech. (Polymer Sc. & Tech.) (IIT Delhi), B.Tech.(Chemical Technology - Plastics Tech.) (HBTI Kanpur)
Designation
Professor
Thrust Area
Polymer Science and Technology, Polymer Composites, Microcellular Thermoplastic Foams, Polymer Processing and Product Design
Address
Polymer & Composite Materials Lab, Department of Petroleum Studies, Aligarh Muslim University, Aligarh 202001, UP (INDIA)
Mobile
Email
sjarizvi@zhcet.ac.in
Time Table
Time Table Odd Sem 2023-24

Prof. Syed Javed Ahmad Rizvi is a Professor of Polymer Technology in the Department of Petroleum Studies, Aligarh Muslim University (AMU), Aligarh, where he has been serving since 2004 and has held the position of Professor since September 2019. He earned his B.Tech. in Plastic Technology, M.Tech. (Polymer Science and Technology), and Ph.D. in Microcellular Polymer Processing Technology from the Indian Institute of Technology (IIT) Delhi. His research spans advanced polymer processing, polymer nanocomposites, conductive composites for hydrogen fuel cells, microcellular injection moulding, additive manufacturing. He has established several research facilities at AMU, including the Polymer and Composite Materials Laboratory and FAB LAB @ AMUIF. Prof. Rizvi has published over 30 papers in high-impact international journals, authored book chapters, secured three Indian granted patents, and leads externally funded research projects exceeding ₹7 crore. As Convener of the Intellectual Property Cell and a member of the Board of the Director of the AMU Innovation Foundation (AMUIF), he has been instrumental in strengthening innovation, intellectual property management, startup incubation, and industry–academia collaborations and commercialization of IPRs. He is the recipient of the prestigious Plasticon National Award (2015) conferred by the PlastIndia Foundation, Mumbai.

KEY PUBLICATION

Publication
1. S. J. A. Rizvi, N.Bhatnagar, Optimization of Microcellular Injection Molding Parameters, International Polymer Processing, pp-399 – 405, XXIV (2009) 5.
2. A,Gandhi, N.Asija, K.K. Gaur, S. J. A. Rizvi, N.Bhatnagar, Ultrasound assisted Cyclic Solid State Foaming for Fabricating Ultra Low Density Prorous Acrylonitrile Butadine Styrene Foams, Materials Letters, 94 (2013) 76–78.
3. Atul bhaskar, Enrique Cuan-Urquizo, Alessandra Bonfanti, Hayk Vasilyan, Tigran Saghatelyan, Loris Domenicale, S.J.A. Rizvi, Naresh Bhatnagar, Porous And Lattice Materials: Mechanics & Manufacture, ANNALS of Faculty Engineering Hunedoara – International Journal of Engineering, Tome XVI [2018], Fascicule 2 [May] 107-111.
4. Syed Javed Ahmad Rizvi, N.Bhatnagar, A.Yadav, M.H. Alaei Microcellular Processing Technology: A Hybrid Approach for Open Cellular Morphology PFAM XIX, Auckland, New Zeeland, Janaury 14-17, 2011.
5. Syed Javed Ahmad Rizvi, N.Bhatnagar, Mechanical Properties of Injection Molded Microcellular Polypropylene Nanocomposites in proceeding of PFAM XVIII, held at Tohoku University Sendai, December 14 – 18, 2009, Japan, pp-1607 - 1618.
6. Syed J.A. Rizvi, N.Bhatnagar, An Investigative Study on Effect of Processing Parameters on Microstructure for Microcellular Injection Molding in proceeding of 25^th International Annual Meeting of Polymers Processing Society – PPS-25 , held at Goa, March 1 – 5, 2009, India.
7. Syed J.A. Rizvi, Mohd. Arif, Waste PET Bottles: A Low-Cost Alternative Composite Material for Roofing, in proceeding of Second International Conference on Recent Advances in Composite Materials, held at India Habitat Center Feb 20 – 23, 2007, India.
8. S. Sibte Asghar Abidi, S.J.A. Rizvi, Trends in Synthesis of Shear Thickening Fluids, International Conference on Chemistry: Frontiers & Challenges, Aligarh, India, March 5 – 6 2011.
9. S. Sibte Asghar Abidi, S.J.A. Rizvi, S. Kumar, Microcellular polymer for biotechnological and biomedical applications, National Symposium On Biomolecular Drug Tasrgets & Workshop on Current Advancement in Bioinformatics, AMU Aligarh, India, March 7 – 9, 2011.
10. S.J.A. Rizvi , N. Bhatnagar, Microcellular Injection Molding Technology: Scopes and Challenges for Open Cellular Structure, in proceeding of International conference PlastIndia – 2012, page – 102, held at Hotel Eros Hilton, Nehru Place, Feb 2 -3, 2012, India.
11. S.J.A. Rizvi, A. Gandhi , Neelanchali A., Hossein Mohammad Aley, N. Bhatnagar, Rheological Study of Polymer/ Supercritical N₂ Single Phase Solution in a Microcellular Injection Molding Machine, PFAM XXI, IIT-Guwahati, India, December 10-13, 2012.
12. S.J.A. Rizvi, N. Bhatnagar, Development of Microporous Thermoplastics Parts via Newly Developed Hybrid Microcellular Injection Molding Technique, APM-2013, CIPET –Lucknow, India, March 1-3 2013.
13. I. Mohammad, M.Y.Ansari, S.J.A.Rizvi, H.Naseem, Continuous Analyzing of pH Based Reaction using LabVIEW, International Conference on Chemistry Frontier and Challenges, Deptt. of Chemistry, A.M.U. – Aligarh, India, March 2-3, 2013.
14. S.J.A. Rizvi, M.H. Alaei , N. Bhatnagar, Expandable Cavity Injection Mold for Microporous Thermoplastics Foams, AWPP - 2013, Polymer Processing Society, Goa, Dec. 8-11, 2013.
15. S.J.A. Rizvi, N. Bhatnagar, Axiomatic Design and Fabrication of Expandable Cavity Mold for Open Cellular Foams, SPE FOAM 2015, Japan.
16. S.J.A. Rizvi, Sumit Kumar, Effect of Injection Molding Parameters on Crystallinity and Mechanical Properties of Isotactic Polypropylene, Aligarh Nano-V & STEMCON, 12-15 March 2016, AMU-Aligarh, .
17. S.J.A. Rizvi, Sumit Kumar, Influence of Key Micro-Injection Molding Process Variables on Crystallinity And Stress Relaxation Of Isotactic Polypropylene, Int. Conf. on Energy, Functional materials and Nanotechnology, 27-29 March 2016, Kumaun University, Nainital, UK.
18. S.J.A. Rizvi, M.Y. Ansari, Imran Mohammad, Use of Agitator Current for Online State Estimation of Bulk Free Radical Polymerization of Methyl Methacrylate in Batch Reactor, Int. Conf. on Recent Advances in Chemical Sciences, 29-230 March 2016, Department of Chemistry, Aligarh Muslim University, Aligarh.
19. S.J.A.Rizvi, Archna Gautami, R. Hasib, "Frugal Design and Fabrication of Falling Ball Viscometer with Image Processing Algorithm for Better Accuracy", National Conference on Mechanical Engineering – Ideas, Innovations & Initiatives (NCMEI3-2016), AMU Aligarh, April 15-16, 2016.
20. Mohd. Mohsin Ikram, Abhinandan Jain, S.J.A. Rizvi, "Design and Development of Ionic Polymer Metal Composite (IPMC) based Light Weight Flexible and Low Cost Artificial Finger", HWWE-2017: 15th International Ergonomics Conference on Humanizing Work and Work Environment, Department of Mechanical Engineering, AMU Aligarh, 8-10 December 2017.
21. M.Y. Ansari, S.J.A. Rizvi "Development Of Inject Printed Flexible Sensor For Monitoring Of Quality Of Potable Water", International Conference on Sustainable Solutions in Industrial Pollution, Water and Wastewater Treatment (ISCAMU 2018), Department of Civil Engineering, AMU Aligarh in collaboration with College of Engineering, The University of Toledo, USA, Nov.10-11, 2018. ISBN: 978-93-88237-19-2
22. Syed J.A. Rizvi, A. Palsodkar, R.P. Choudhury. Analysis of Time Delay in Mold Indexing for the Development of Multi Component Injection Molding Machine Using Simple Hydro Motor, in proceeding of International conference on advances in polymer blends, IPNS and Gels: Macro to Nano Scale, page – 204, held at School of Chemical sciences, M.G. University – Kottayam, March 21 – 23, 2005, India.

Study Material

LIST	Download	UPLOADED DATE
Polymer Sci. & Tech (PKC4070) - Unit II		31/07/2023
Unit - I PKE6170		19/09/2025
Polymer Sci. & Tech (PKC4070) - Unit IV		31/07/2023
Unit II (PKE6170)		19/09/2025
Unit-III PKE6170		19/09/2025
Unit-IV PKE6170		19/09/2025
Polymer Sci & Tech (PKC4070) - Unit I		31/07/2023
Polymer Sci. & Tech (PKC4070) - Unit III		31/07/2023
Polymer Lab Manual		06/02/2019